01903 764113 |
How it works
> Hoze reducer: 3/4" - 1/2"
Hoze reducer: 3/4" - 1/2"
Description & options
Hose reducers are needed when increasing or decreasing hose size to a higher or
lower diameter or vice versa.
Put me on the Waiting List
Add to Cart
190L Rainsaver Water Butt inc Stand, Lid & Tap
Stepped hosetail - 1/2", 3/4", 1" with 3/4" BSP thread (locking nut supplied)
1 x HydroButt (Complete Unit)
200L Cloudburst Water Butt inc Stand, Lid & Tap
Jubilee clips - 3/4"
You may also need some of these accessories...
Rainwater Diverter Downpipe Connector Kit
Connect your HydroButt or Water Butt to your downpipe with this convenient Connector Kit. This high-quality, leak proof kit contains all the fittings and hosing you need to collect the rain water directly from your drainpipe.
Fits standard plastic household downpipes whether round (68mm diameter) or square (65mm).
Pipe is 30cm long
Round (68mm diam) Square (65mm)
T-Connectors are used when "daisy chaining" more than one waterbutt/storage tank
Jubilee clips are needed to ensure an adequate seal has been accomplished when attaching different sized hose to a connector
Hose reducers are needed when increasing or decreasing hose size to a higher or lower diameter or vice versa
Size: 1/2" - 3/4"
Needed if you use 3/4" hose. Simply attach the hosetail to the waterbutt/storage tank. Replace the waterbutt tap with the hose tail.
If you wish to keep the existing tap, drill a new hole using a 1" or 25mm hole saw drill. Cut off any unused hose sizes end piece
1/2", 3/4", 1"
Buying accessories on their own delivery charges will be applied at the checkout. to view our delivery prices, please click